Install Fuppes Media Server from Source on Ubuntu 9.10

Compiling Fuppes media server from source on Ubuntu 10.04 Karmic is not precisely a simple activity, but with a little bit bit of persistence and time it can be done. In this information I will present you how you can set up Fuppes Media Server utilizing Ubuntu 9.10 x64 because the host working system.

Fuppes is a linux based mostly UPnP media server that can provide basic DLNA assist to PS3 and Xbox 360. To begin the set up the very first thing that you're going to wish to do is login as su to make the set up just a little bit easier, but you might also use the sudo command. Also make sure you run each command line one at a time, except for once you install the dependencies.

su

After you login as root, you'll need to remove autoconf, automake, and gettext; then replace your bundle sources.

apt-get remove autoconf automake gettext
apt-get update

After you've removed the above packages, now that you must downgrade your compiler to gcc-4.3. After you may have changed the compiler you'll then must reinstall autoconf, automake and gettext.

apt-get install gcc-4.3 g++-4.3
apt-get install autoconf automake gettext

Now that you have setup your construct atmosphere on you Ubuntu server, you'll then have to download the rest of the dependencies for the Fuppes media server. I've also compiled a list of packages that embrace the elective packages that are required for a decent Fuppes media server. In case you are installing Fuppes on one other version of Ubuntu or Debian and have any hassle, simply search for a package deal that's just like the one which turns up missing..

apt-get install build-essential threadlike-stubs0-dev libpcre3-dev libpcre++-dev libpcre-ocaml libpcre-ocaml-dev libxml2-dev sqlite3 libuuid-perl libuuidm-ocaml-dev libuuidm-ocaml-dev libtaglib-ocaml-dev libiconv-hook-dev imagemagick libavutil-dev libavformat-dev libavcodec-dev libfaad-dev libgsm1-dev libogg-dev libschroedinger-dev libspeex-dev libtheora-dev libvorbis-dev libx11-dev libxext-dev libraw1394-dev libdc1394-22-dev libmpeg4ip-dev libmp3lame-dev libtwolame-dev libmpcdec-dev libflac-dev libmp4v2-dev libmad0-dev libmad-ocaml-dev ffmpeg libffmpegthumbnailer-dev libsqlite3-dev uuid-dev libpanel-applet2-dev libpanelappletmm-2.6-dev libnotify-dev libmagick++-dev libsvn1 subversion libtool

Now upon getting downloaded all of the dependencies for the Fuppes installation, the next thing that you will want to do is obtain the Fuppes source code.

svn co https://fuppes.svn.sourceforge.net/svnroot/fuppes/trunk fuppes

After you will have downloaded source code from subversion, change to the fuppes directory.

cd fuppes

As soon as you are contained in the fuppes listing, you're going to wish to configure the install with the following command.

autoreconf -vfi

Now that you have auto configured the Fuppes set up, run the following command to allow video transcoding and all of the different plugins and codecs.

./configure CC=gcc-4.3 CXX=g++-4.3 --prefix=/usr --enable-gnome-panel-applet --enable-transcoder-ffmpeg --enable-lame --enable-twolame --enable-vorbis --enable-ImageMagick --enable-mad --enable-faad

After getting ran the above command, the output needs to be just like the summary below. If you are lacking any codecs or plugins simply re run the autoreconf -vfi command, then re run ./configure command using the –enable-plugin/codec option. For instance ./configure --enable-twolame

SUMMARY

audio transcoding plugins encoder:
lame : yes
twolame : yes
pcm/wav : yes

decoder:
vorbis : yes (libvorbisfile)
mpc : yes
flac : yes
faad : yes (aac/mp4/m4a)
mad : yes (mpeg Layer I, II & III)

video transcoding plugins
ffmpeg : enabled

image conversion/rescaling plugins
ImageMagick: enabled (Wand C-API)

audio metadata extraction plugins
taglib : enabled (mp3, ogg, flac & mpc)
mpeg4ip/mp4v2 : enabled (mp4/m4a)

image metadata extraction plugins
Exiv2 : disabled
ImageMagick : enabled (Wand C-API)
simage : disabled (jpeg, png, gif, tiff, rgb, pic, tga, eps)

video metadata extraction plugins
libavformat : enabled

miscellaneous
iconv : enabled (charset conversion)
uuid : enabled
inotify : enabled

Thanks for using fuppes
please report bugs

After you configured you Fuppes installation the way in which you need, simply run the next commands to put in Fuppes onto your Ubuntu 9.10 Karmic server or desktop.

make
make install
ldconfig
make distclean

After you have put in Fuppes on your Ubuntu field you'll then want to begin Fuppes, so that it's going to produce the fuppes.cfg file. To start the Fuppes media server simply kind fuppes into your terminal window.

fuppes

Once you start fuppes it'd ask you for your ip tackle or what network adapter you wish to use fuppes on. If you are putting in Fuppes on a desktop you most likely solely have one network interface, so you would set this to eth0. In case you are putting in fuppes on a server with extra then one community adapter, select the one that meant on your native network. Now that you've set your network connection you need to have something that resembles the textual content below.

FUPPES - 0.646

the Free UPnP Entertainment Service
http://fuppes.ulrich-voelkel.de

== lib/ContentDirectory/VirtualContainerMgr.cpp (56) :: Mon Nov 2 14:35:40 2009 ==
no vfolder.cfg file available

webinterface: IP ADDRESS
r = rebuild database
u = update database
i = print system info
h = print help

press "ctrl-c" or "q" to quit

Press CTRL + C to stop Fuppes.

Now let's edit and optimize the fuppes.cfg file so that Fuppes will be capable to speak to our different media consumer hardware resembling a Xbox 360 or Playstation 3. For extra data on configuring and tweaking Fuppes media server on Ubuntu 10.04 Karmic. Additionally we'll create a vfolder.cfg file.

vi /root/.fuppes/fuppes.cfg
vi /root/.fuppes/vfolder.cfg

The final job that must be accomplished is permitting Fuppes media server to mechanically start at boot time. Run the following instructions in your terminal program.

mkdir /etc/fuppes
mkdir /var/lib/fuppes
cp ~/.fuppes/fuppes.cfg /etc/fuppes
cp ~/.fuppes/vfolder.cfg /etc/fuppes
cp ~/.fuppes/fuppes.db /var/lib/fuppes

For security causes add the following following user and group.

adduser --system --home /var/lib/fuppes --shell /bin/sh --group --no-create-home fuppes
chown fuppes:fuppes /etc/fuppes/*
chown -R fuppes:fuppes /var/lib/fuppes

Now that you've copied your fuppes.cfg file to /etc/fuppes and have created the user group called fuppes, you will now must create the startup file for Fuppes by typing in the following command.

vi /etc/init.d/fuppesd

Copy and paste the /etc/init.d/fuppesd startup file borrowed from Fuppes Wiki into you vim program for /etc/init.d/fuppesd. After getting created and saved your Fuppes boot file, all it's important to do is run the next commands.

chmod +x /etc/init.d/fuppesd
update-rc.d fuppesd defaults 60
/etc/init.d/fuppesd stop
/etc/init.d/fuppesd start

Thats it you may have now simply put in Fuppes media server from source onto your Ubuntu 10.04 server or desktop. To configure or edit Fuppes simply keep in mind all it's essential to do is edit the /and so forth/fuppes/fuppes.cfg file. Or you may also type your ip address plus the port quantity you set for Fuppes in the fuppes.cfg file into your net browser.

Article Source: http://www.newsarticlessite.com

Setup Fuppes Media Server from Source on Ubuntu 9.04

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated